European Standard DIN EN 14214

Characteristics Units Minimum Limit Value Maximum Limit Value Method of Testing
Density at 15Ckg/m860900EN ISO 3675
EN ISO 12185
Kinamatic Viscosity at 40Cmm/s3,55,0EN ISO 3104
Flash PointC120 ISO /CD 3679
Content of Sulphurmg/kg 10 
Conradson Carbon Residuemass % 0,03EN ISO 10370
Cetane number 51 EN ISO 5165
Content of Sulphate Ashesmass % 0,02ISO 3987
Content of Watermass % 0,05EN ISO 12937
Overall Contaminationmg/kg 24EN 12662
Corrosion Effect on Copper (3h with 50C)
(3h bei 50C)
Corrosion Category1 EN ISO 2160
Oxidation Stability at 110Ch6 pr EN 14112
Acid Numbermg KOH/g 0,5pr EN 14104
Content of Methanolmass % 0,2pr EN 14105
Content of Monoglyceridesmass % 0,8pr EN 14105
Content of Diglyceridesmass % 0,2pr EN 14105
Content of Triglyceridesmass % 0,02pr EN 14105
Content of Free Glycerolmass % 0,02pr EN 14105
pr EN 14106
Overall Glycerolmass % 0,25pr EN 14105
Iodine Number  120pr EN 14111
Content of Phosphorusmg/kg 10pr EN 14107
Content of Alkali (Na, K)mg/kg 5pr EN 14108
pr EN 14109
Content of Estermass %96,5 pr EN 14103
Content of Linolenic Methyl Estermass % 12pr EN 14103
Content of Fatty Acid Methyl Ester (with more than three double bonds)mass % 1 
CFPP
15.04. till 30.09.
01.10. till 15.11.
16.11. till 28.02.
01.03. till 14.04.

C
C
C
C
 
0
-10
-20
-10
EN 116
Kontakt
PPM Energie GmbH

Am Gewerbering 5
D-02689 Sohland/Spree
Tel: +49-35936-339960
Fax: +49-35936-339969

post@ppm-biodiesel.com